WELCOME TO OUR BLOG

We're sharing knowledgein the areas which fascinate us the most
click
November 13th, 2026

Classification of Injection Molding Machines: 7 Ways to Tell Them Apart

November 12th, 2026

Finding the RIGHT Mold & Injection Molding Factory near Baolilai Hotel

November 11th, 2026

How much does an injection mold cost? Key cost drivers and quotation breakdown

November 6th, 2026

POS terminal housing molding: cosmetic finish & anti-static requirements

November 5th, 2026

Why Material Choice Makes or Breaks Robotic Lawn Mower Housings in UK Gardens | JBRplas

October 31st, 2026

The 7 Ejection Methods Every Injection Mold Designer Must Know

October 30th, 2026

Prototype Tooling, Low Volume Molding and Production Steel Mold: Roadmap for New Product Launch

October 30th, 2026

Why Is the Mold Bigger Than the Product? Understanding "Shrinkage Compensation" in Mold Design

October 25th, 2026

Textured Mold Surfaces: The Complete Guide to Etching, Texturing & Production

October 23rd, 2026

What Do I Need to Prepare Before Starting an Injection Molding Project?

October 22nd, 2026

Complete Guide to Injection Mold Gating Methods

October 15th, 2026

Injection Mold Selection: Hot Runner Costs More, Cold Runner Saves on Mold Cost — How to Balance for Large-Volume Production?

October 15th, 2026

JBRplas Invests in New EDM Machine to Strengthen Precision Mould Manufacturing

October 14th, 2026

Injection Molding Tolerances: How Overly Tight Dimensions Increase Tooling and Part Costs

October 7th, 2026

Meet JBRplas at Fakuma 2026: Custom Injection Molding Solutions in Friedrichshafen, Germany

October 3rd, 2026

Learning That Travels: Why JBRplas Send Its People to Train

September 30th, 2026

Hot Runner vs Cold Runner Molds: Pros, Cons and Application Scenarios for Volume Production

September 18th, 2026

Coffee Machine Housing with Laser Texture Surface Finishing

September 18th, 2026

DFM for Injection Molding: Step-by-Step Guide to Prepare Plastic Parts for Stable Mass Production

September 18th, 2026

JBRplas: ISO 9001 & 13485 Injection Molding Factory in Shenzhen

September 17th, 2026

2K (Two-Shot) Molding: Principle, Challenges and Application Guide

September 11th, 2026

Injection Mold Cooling: How Cooling Design Affects Cycle Time and Part Quality

September 10th, 2026

Submarine vs. Pin Point vs. Valve Gate: How to Choose the Right One

September 10th, 2026

The Critical Role of Parting Line Design in Injection Molding: From Tooling to Production

September 3rd, 2026

A Proven Process for Transferring Your Injection Mold Tooling with Confidence

September 3rd, 2026

DFM for Injection Molding: Critical Rules to Avoid Costly Mold Revisions for High-Volume Production

September 3rd, 2026

JBRplas Injection Molding – Master Texturing for Flawless, Premium Parts

August 28th, 2026

65% Risk of Price Deviation: Why Photo‑Based Mold Quotes Mislead Hardware Startups

August 26th, 2026

Injection Molding Design Guide: Key Engineering Rules for Flawless Mass Production

August 24th, 2026

Why Injection Molds Fail Prematurely (Rarely Caused by Steel)

Leave a message
First Name
Last Name
Email *
Message
Verification Code *
Click to verify
We use Cookie to improve your online experience. By continuing browsing this website, we assume you agree our use of Cookie.
Message Us